玖城牌放電加工液 JC Electric Discharge Machining Fluid

玖城牌放電加工液

產品型號:EDM-1 EDM-2

產品描述:玖城牌放電加工液以深度精制礦物油為基礎油，加入多種復合添加劑調合而成，低硫低芳烴，無毒、無味，黏度小，流動性好，具有良好的冷卻性和排屑性，閃點較高，安全性好。

產品特點:

較窄的流程、低硫低芳烴，無毒性，環保健康。

粘度小，冷卻性及排屑性能良好，提高模具表面精度。

較高的閃點，降低安全隱患。

較低的揮發性，具有良好的使用安定性。

產品應用:

適用于各類國產和進口電火花加工機床的放電加工。

產品簡介: 玖城牌放電加工液以深度精制礦物油為基礎油，加入多種復合添加劑調合而成，低硫低芳烴，無毒、無味，黏度小，流動性好，具有良好的冷卻性和排屑性，閃點較高，安全性好。JC EDM fluid is based on the deep refined mineral oil as the base oil，and add a variety of compound additives refined.Low sulfur and low aromatics, non-toxic, tasteless, low viscosity and good fluidity.It has good cooling and chip removal, high flash point and good safety.

產品編號 EDM-1 EDM-2

产品说明
产品参数

JC Electric Discharge Machining Fluid

Product number:EDM-1 EDM-2

product description:

JC EDM fluid is based on the deep refined mineral oil as the base oil，and add a variety of compound additives refined.Low sulfur and low aromatics, non-toxic, tasteless, low viscosity and good fluidity.It has good cooling and chip removal, high flash point and good safety.

characteristics:

Narrow process, low sulfur and low aromatics, no toxicity, environmental health.

Low viscosity, good cooling and chip removal performance, improve mold surface accuracy.

High flash point to reduce security risks.

Low volatility and good stability.

Recommended use:

It is suitable for electrical discharge machining of all kinds of domestic and imported EDM machines.

玖城牌放電加工液典型數據：Typical data of JC EDM fluid:

項目Project	典型數據Typical data
項目Project	EDM-1	EDM-2
運動粘度40℃，mm2/s Kinematic viscosity40℃,mm2/s	1.489	2.234
銅片腐蝕（100℃，3h）Copper corrosion（100℃，3h）	合格PASS	合格PASS
閃點（閉口），℃ Flash point（close）,℃	102	111